Spotting Scopes (กล้องดูนก) > Vixen >

Product No.3919 Universal Digital Camera Adapter (Catalog 1019 p.27)
 
Product No.3919 Universal Digital Camera Adapter (Catalog 1019 p.27)
 

Product No.3919 Universal Digital Camera Adapter (Catalog 1019 p.27)

The adapter to connect a camera
It is designed to pinch the outer rim of the eyepiece of the optical device, so it can accommodate various sizes of eyepieces.
Slow motion control is equipped on the camera mount. The camera can freely be moved in the vertical and horizontal directions, making it easy to adjust the optical axis.
Extension Ring attached
Size : Height 208×Width 117×Depth 114mm
Weight : About 370g

The fieldscopes that can be attached
・The outer diameter of the eyepiece: 36~61mm
・Eyepiece used: GLH15, GLH20, GLH20D, or GLH30
For the compact digital camera which can be connected, see below:

The cameras which can be connected to the "Digital Camera Quick Bracket"
The Digital Camera Quick Bracket can be installed on any camera which satisfies the following conditions.

1.1/4"-20 screw hole(*) is located on the bottom of the camera.
*Size: W 1/4"
2.Weight is 300g or lower
Any load heavier than 300g can cause the product to become bent.
3.The height of the center of the lens from bottomis 16~53mm.
4.The distance from the 1/4"-20 screw hole to the tip of the lens (at a full extention) is 18~71mm.
* This applies to the case in which an NLV 20-mm eyepiece is attached to the flip mirror.
5.The width between the center of the lens and 1/4"-20 screw hole (in the horizontal direction) falls within 53mm.
* This applies to the case in which a flip mirror or a GLH20D eyepiece is used.